DJ Mixers
Audiophony PREZONE642 Mixer 6 Micro, 4 Lines, 2 Zones Artikuls: 17016
Mixer 10 inputs and preamp 2 zones 

Resolutely turned towards professional installation, the mixer / preamp PREZONE642 has 6 mic inputs / line mono XLR or Jack and 4 stereo inputs on RCA or Jack. Each input can be sent independently to each of the two areas, or to both simultaneously to provide maximum opportunities. 
Each area is equipped with a SUB filtered output and adjustable volume, and an insert for placement of an effect or additional protection. 

The mixer is equipped with a section of pre-listening with headphones output for control of each zone. The mixer / zoning ideal compact when sources are multiplying 
  • two completely independent areas 
  • 6 microphone inputs and 4 line inputs 
  • Viewing level by area and input 
  • 24 V Security
An advanced master section. Each area:

  • Its own volume 
  • His own EQ 
  • Self-adjusting output level SUB 
  • Independent level display output 
The headphone section is advanced with: 

  • A selection of listening by using a button PFL
  • The ability to listen to each output independently via a selector area.

Microphone and line inputs. Each microphone input has:

  • A gain setting 
  • A 3-band EQ 

These settings are for the installation and can not be changed with a screwdriver Each entry line offers: A gain adjustment. (This setting is for the installation and can not be changed with a screwdriver)


Specifications:

  • 6 inputs mono Mic / Line XLR / Jack mono 
  • Phantom Power and Talkover on inputs 1 and 2 
  • 4 stereo inputs on RCA or Jack 
  • Priority input on Jack 6.35 
  • Outputs zones 1 and 2 balanced XLR mono 
  • Insert areas TRS 6.35 per zone 
  • Symmetrical SUB output on Jack 
  • REC Output Stereo output on RCA 
  • Gain control and tone (3 bands) on mic 
  • Adjustable gain on stereo inputs 
  • Tone Control (2 bands) by area 
  • Volume control area by SUB 
  • Access to dedicated installer settings (via screwdriver) 
  • Assign zone by PFL input signal and display 
  • Peak LED 
  • Display output level area through 8 Meter LEDs 
  • Headphone output with volume control (zones and PFL) 
  • Power supply: 230 V 50/60 Hz 
  • Power consumption: 16 Watts 
  • Power backup DC24 V Link Out 
  • Frequency Response: 20 Hz - 20 kHz (+ / - 3dB) 
  • THD (1 kHz rated power): <0.2% 
  • Equalizer:
    - High: + / -12 dB at 12.5 kHz
    - Mid: + / -12 dB at 2.5 kHz
    - Low + / - 12 dB @ 80 Hz 
  • Dimensions: 295 x 085 x 482 mm 
  • Rack 19 inch 
  • Height: 2 units 
  • Weight: 5 kg