New concept in the development of the hazing technique

The purpose of a hazer is to obtain a translucent haze, that is not disturbing on the scene

The new Z-300 II Fazer uses standard fog liquid

10 meter wired multi-function remote controller with 5-pin plug for ANTARI Fazer Z-300

model.

• The interval knob adjusts the time between discharges when the timer function is engaged.
• The range is from 10 seconds ~ 250 seconds.
• The second knob, labeled volume, controls the volume of haze produced. The range is from
• 0% ~ 100% of maximum output.
• The yellow TIMER button controls the timer function. Depress the button to activate. When
• activated the yellow light will turn on. Adjusting the interval knob will determine the time
• between haze output (10 ~ 250 seconds). The duration of output is set at 15 seconds. The
• volume can be adjusted using the volume knob to control the amount of haze produced.
• The red CONTINUOUS button sets the machine to constant haze production. To activate this
• function, depress the red button. The volume knob can be used to regulate the volume of the
• steady stream of haze produced.
• The green MANUAL button will produce a continuous blast at maximum volume while the
• button is held down. When released, the manual function stops and the machine will return to
• the previous setting; timer; continuous; or stationary.
• Note: the Continuous function will override the Timer function. Therefore, if both buttons have
• been depressed the Fazer will haze continuously. The manual function overrides all functions.
• When depressed and held down the Fazer will haze at maximum volume for as long as the
• button is held down, regardless of the machine’s setting at the time.