Studio Mixers
SYNQ SMP 16.42 PRO PA Mixer 16ch. Article number: 15037

SYNQ SMP 16.42 PRO PA Mixer
  • 16 channel PA-mixing console with very low noise architecture.
  • 4 subgroups with independent sub-masters
  • Internal 24bit DSP-effect unit with 100 presets & foot switch
  • USB in/out for direct recording to PC
  • 12 balanced input channels, 8 Mono + 4stereo:
    - Input gain
    - Inserts on mono channels
    - Peak indication @ -5dB
    - High pass filter @ 75Hz
    - 3band equalizer with parametric mid
    - 1 AUX send pre (monitoring)
    - 1 AUX send with pre/post switch
    - EFX send for effects section (post)
    - PAN/BAL control
    - Channel mute button
    - PFL-switch
    - LEVEL with 60mm fader control
    - L-R and subgroup 1-2 3-4 select
  • 48V Phantom power on all balanced micros
  • Use of external effects possible
  • Balanced Main L/R + subgroup output controls
  • Headphone and control room output
  • 2x 10section LED VU-meters
  • 7band equalizer on master mix
  • External power transformer
  • 19” brackets for easy rack mounting included

Max output level (0.5% thd @ 1kHz): 

  • +26dB (MAIN L/R)
  • +20dB (ALT 3/4, AUX/EFX, CTRL ROOM)
  • +20dB (INSERT)
  • More than 100mW (HEADPHONES) @33Ohm

T.H.D:
<0.1% @ +14dB 20Hz~20kHz (MIX L/R, ALT 3/4, AUX/EFX SEND, CTRL ROOM) @10kOhm

Frequency response:
20Hz~20kHz, +1/-2dB (MIX L/R, GROUP 1-2/3-4, AUX1, AUX2/EFX SEND, CTRL ROOM) @10kOhm 


Hum and Noise (average Rs=150Ohm):

  • -127dB equivalent input noise
  • -95dB residual noise (MIX L/R, GROUP 1-2/3-4, AUX1, AUX2/EFX SEND, CTRL ROOM)
  • -88dB (MIX L/R, GROUP 1-2/3-4, AUX1, AUX2/EFX SEND, CTRL ROOM) Master fader at nominal level and all channel assign switches off.

Maximum Voltage Gain:

  • 74dB MIC IN TO Main L/R
  • 74dB MIC IN TO GROUP 1-2/3-4
  • 66dB MIC IN TO AUX1/AUX2 (PRE)
  • 76dB MIC IN TO AUX2 (POST)
  • 76dB MIC IN TO EFX
  • 80dB MIC IN TO CONTROL ROOM L/R
  • 52.2dB IN TO REC L/R
  • 54dB LINE IN TO MIX L/R
  • 54dB LINE IN TO GROUP 1-2/3-4
  • 46dB LINE IN TO AUX1 / AUX2 (PRE)
  • 56dB LINE IN TO AUX2 (POST)
  • 60dB LINE IN TO CONTROL ROOM L/R
  • 44dB STEREO IN TO MAIN L/R
  • 44dB STEREO IN TO GROUP 1-2/3-4
  • 16dB AUX RETURN IN TO MIX L/R
  • 12dB AUX RETURN IN TO AUX1/AUX2
  • 20dB TAPE IN TO MAIN L/R

Crosstalk (@ 1kHz):

  • -70dB between input channels
  • -70dB between input/oputput channels

Gain Control (mono input channel)
44dB Variable (-50dB ~ -6dB) (-30dB ~ +14dB)


Gain Control (combined mono/stereo input channel)
40dB Variable (-20dB ~ +20dB)


Mono input channel Equalization:
HIGH: 12kHz shelving
MID: 100-8kHz peaking
LOW: 80Hz shelving
*Turnover/roll off frequencies: located 3dB below max. boost/cut


Stereo input channel Equalization:
HIGH: 12kHz shelving
HIGH MID: 3kHz peaking
LOW MID: 500Hz peaking
LOW: 80Hz shelving
*Turnover/roll off frequencies: located 3dB below max. boost/cut


Graphic Equalizer:
7-band (63, 160, 400, 1K, 2.5K, 6.4K, 16KHZ)


LED Meters: 
2x 10 segment LED for MAIN L/R, GROUP1-2/3-4 or PFL


Internal Digital Effect: 
100 selectable presets
FOOT Switch control (ON/OFF)


Channel indicators:
Peak: an indicator for each channel turns on when the pré-channel fader signal is 5dB below clipping


Phantom Power (balanced input): +48V DC
Power Supply:  AC 230 V, 50Hz
Power consumption: 40W

Weight: 5,4 kg
Dimensions: 436(W) x 90(H) x 420(D) mm