The PG58 has been tuned specifically for vocal applications and is mainly used by amateur/semi-pro lead and backup vocal artists with some experience in live performance.

The PG Wireless Vocal System comes with the Analog Wireless Receiver BLX4 that provides improved linearity and frequency response.

The receiver BLX is ready to perform right out of the box and is the clearest choice for performers who wish to unplug from the wire. It’s also available as rack mount, metal receiver and Dual Receiver.

Up to 12 compatible channels per group with group and channel scan for easy set-up.

For ideal signal strength, antennas on a wireless system need to be set up in a certain way. The internal antennas on the BLX receiver are already set in this ideal way, offering up to 100 m operating range and optimal signal strength.

Additionally internal antennas cannot be broken during setup, use or transport.

Yes, with one button you can start the group and channel scan, which gives you the best open frequency. Adjust the transmitter to the same channel and you’re ready to go.

The proportion between input signal of the transmitter and output signal of the receiver is always constant.

The frequency response of the wireless microphone is almost identical to the frequency response of a wired mic. Also the dynamic performance is almost the same.

With the old PG Wireless System “PG” is the name for the microphones as well as for the receivers. With the new system, the name “PG” stands for the whole line of microphones in differentiation to SM and Beta microphones. The receivers name is “BLX”. This receiver is also part of SM and Beta Wireless Systems.

The new PG Wireless Systems come with the Analog Wireless Receivers that provide improved linearity and frequency response as well as up to 12 compatible channels per group with group and channel scan for easy set-up.

PG58 VOCAL MICROPHONE

• Tailored frequency response is smooth and extended. Tuned specifically for vocal applications.
• Cardioid polar pattern picks up the most sound from in front of the microphone and some sound from the sides. Less susceptible to feedback in high volume settings.
• Dynamic cartridge has a simple, rugged coil. Handles extreme volume levels without distortion.
• Cartridge includes a neodymium magnet for high output level.
• Internal shock mount for reduced handling noise.
• Durable metal construction.
• On/off switch for onstage control.
• Hardened steel mesh ball grille that resists wear and abuse.
• Integral "pop" filter reduces explosive breath sounds and wind noise.
• Includes 15ft. (4.57m) cable, break-resistant mic clip and storage bag.

BLX2 HANDHELD TRANSMITTER

• Power and battery status LED
• Adjustable gain control
• Quick and easy frequency matching
• AA batteries (included) provide up to 14 hours of continuous use
• 100 m (300 ft.) operating range (line of sight)

RECEIVER BLX4

• Up to 12 compatible systems (region dependent)
• Microprocessor-controlled internal antenna diversity
• One touch QuickScan locates the best open frequency
• ¼" and XLR audio outputs
• Two color audio status indicator LED

SYSTEM TECHNICAL SPECIFICATIONS

• Compatible systems per frequency band (up to): 12
• Selectable frequencies: 150
• Auto Setup Features: QuickScan : Finds group with most compatible frequencies and sets to best frequency
• Audio Reference Companding: No
• Included Antennas: BLX4, BLX88: Internal, BLX4R: Detachable
• Antenna Options: No
• Receiver Network Ability: No
• PC Control: No
• Rack Hardware: URT2 (not included), Rack mount brackets (only with rackable/BLX-R Sets)
• Case: No
• Transmitter Display: LED
• Receiver Display: BLX4, BLX88: LED, BLX4R: High-resolution LCD screen
• Battery, Endurance: 2AA, up to 14h
• Environment: Small to medium stages

FURTHER TECHNICAL SPECS

• Operating Range: 91 m ( line of sight - actual range depends on RF signal absorption, reflection and interference)
• Available Frequencies: Between 524–865 MHz (available frequencies depend on applicable regulations in country where system used)
• Audio Range: 50–15,000 Hz (dependent on microphone type)
• Transmitter RF Output Power: 10 mW, typical (varies by region)
• Audio Output Connector: XLR and 1/4" (6.3 mm) unbalanced Maximum Output Level: -27 dBV (XLR, mic level), -13 dBV (1/4")
• Battery Life: Up to 14 hours
• Dynamic Range: 100 dB A-weighted
• System Distortion: 0.5% THD typical (ref. +/- 38 kHz deviation, 1 kHz tone)
• Operating Temperature Range: -18°C (0°F) – +50°C (122°F)
• Power Requirements: BLX1, BLX2: 2 AA alkaline or rechargeable batteries
• BLX4: 12–18 V DC at 150 mA, supplied by external power supply

COMPONENT SPECIFICATIONS:

BLX4 RECEIVER

• Output Impedance:
  - XLR connector 200 Ω
  - 6.35 mm (1/4") connector: 50 Ω
• Audio Output Level Ref. ±33 kHz deviation with 1 kHz tone:
  - XLR connector –27 dBV (into 100 kΩ load)
  - 6.35 mm (1/4") connector –13 dBV (into 100 kΩ load)
• RF Sensitivity: 105 dBm for 12 dB SINAD, typical
• Image Rejection: >50 dB, typical
• Dimensions: 40 mm X 188 mm X 103 mm (H x W x D)
• Weight: 241 g
• Housing: Molded ABS
• Power Requirements: 12–15 V DC @ 160 mA, supplied by external power supply (tip positive)

BLX2 HANDHELD TRANSMITTER

• Audio Input Level
  - gain 0dB: -20 dBV maximum
  - gain -10dB: -10 dBV maximum
• Gain Adjustment Range: 10 dB
• RF Transmitter Output: 10 mW, typical, varies by region
• Dimensions: 224 mm X 53 mm dia.
• Weight: 218 g (without batteries)
• Housing: Molded ABS
• Power Requirements: 2 LR6 AA batteries, 1.5 V, alkaline
• Battery Life: up to 14 hours (alkaline)